• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC windows are an excellent choice for modern homes. They are easy to maintain, durable and long-lasting. They are not susceptible to get rotten or rusty like timber and aluminum.

It is important to clean and oil UPVC doors and windows regularly. This will reduce repair costs and increase energy efficiency.

1. Broken Glass

The damaged glass in your windows can cause serious damage to your home and even be fatal. You should take the time to make sure that your windows are in good shape.

For single pane windows, it can be relatively simple to replace windows, and the new one will generally fit within the old frame very easily. However If you have double pane windows that are anchored by internal beading it will be more difficult to get rid of the old panes and put in new ones. In this instance you'll need to source some plastic spacers that will help the new pane to fit correctly into the window frame.

Wearing eye protection and thick gloves is a must if you plan to remove the glass yourself. You should also lay down a dropcloth before you begin working on the window panes so that any shards of glass fall onto the fabric, not onto the floor and could be trampled.

Once the glass has been removed from the window, it's best to cover the gap with some clear packaging tape or duct tape to block water and drafts from getting into the property until a professional is able to come out and repair the window. This will also act as a barrier, preventing any intruders from getting access to your home. If the distance between the window and the door is substantial, you may want to use security screens that includes windows. This will provide the best of both.

2. Sagging

Upvc windows and doors are a cost-effective energy-efficient, durable and long-lasting alternative to timber windows made of sash. As time passes, they may be affected by a variety of issues such as sagging. A sagging window in uPVC could cause issues with light, draughts and even security. It is crucial to act immediately if you discover that your uPVC windows are sliding.

Repositioning the hinges can aid in fixing a window which is sliding. To do this, you'll need open the window to access the frame. Then, you can remove the hinges on the top and bottom using a screwdriver and adjust the hinges clockwise or counter-clockwise. Once you've repositioned the hinges, close your window and verify the fitting. If you're satisfied with the fit of the window, you can tighten screws to secure them in the right position.

If you are unable to reposition the hinges you may require replacing the seal. Seals made of rubber can dry out and lose their elasticity with time, which causes them to loosen. It is important to replace your seal as soon as you can in order to keep your uPVC window watertight and draughtproof.

UPVC handles can also loosen up. This is typically caused by screws that have been removed over time, but it can also be due to the mechanism of the handle getting worn out. Fortunately, it's easy to repair the handle of a window that is loose yourself. The first step is to close your window and do an experiment to ensure that it fits. The corner joints of the sash need to align with the casing joint. If it isn't then you can make use of a screwdriver to loosen the handle and reverse the mechanism back into position.

3. Water Leaks

If you awake to wet floors and damp walls every time it rains it's important to take action. Water leaks from windows not only lead to the degrading of the structure of your home but also hamper your efforts to control the temperature inside your home. Most often, uPVC window leaks are caused by a damaged or missing sealant.

It is a fairly easy fix that can be completed by any skilled DIYer. Depending on the severity of the problem is, the old caulking might need to be removed. It is crucial to keep in mind that when it is about uPVC window repairs, you should not be tempted to apply too much caulk in order to make the area harder to clean and reduce the efficiency of your energy.

Verify that the drainage holes are free of debris in them, and also that the sill pan is properly angled to allow the water to drain from the window. In more serious instances, you might need to consider replacing the window.

Other indicators of long-term water leakage include decayed sills and the appearance of black spots of mold on the wall near the window. This is a fungus that thrives in damp conditions and can quickly spread across the home.

It is also important to remember that if the leak is coming from between the glass of your double-glazed windows it may be more likely to be an issue with the glass seal, rather than the frame or sliding. A uPVC specialist can easily fix this issue by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

If your uPVC windows are difficult to open, or slack and blow open with ease it could be hinges at the fault. They can be easily repaired by any DIYer who is skilled and can usually be completed in a matter of minutes.

Almost every household in the UK will have either top hung or side-hung upvc window repairs windows that use hinges and, like all mechanical parts, they can wear down over time. It is very easy to change a window hinge but it's much easier if someone helps you hold the frame.

Check that the uPVC hinges are open and closed in the proper direction. You can do this by looking for the arrows on each hinge, this shows which way the window should be opened.

The issue can be caused by opening the window improperly or a faulty installation in the factory. It is usually possible to fix the issue by sending us a picture on our website. We will be pleased to offer you suggestions.

It is also essential to ensure that the hinges are lubricated on a regular basis. This can be done by applying an oil that is light in nature to the hinges. We suggest using a solvent-free lubricant, such as the 3-in-one Multi-Purpose oil. Regularly lubrication will help the window open and close more easily. It can also stop corrosion and reduce the possibility of sticking. It is recommended to perform this every year. WD40 and other solvent-based fluids are not recommended since they can damage the parts of your upvc window repair window.

5. Draughts

Draughts in upvc windows can be caused by a variety of different things. The hinges, also because of wear and tear, can become misaligned, this can cause gaps to develop between the sash and the frame. This can be easily fixed by giving them a good clean, but if they are beyond repair it may be necessary to get them re-aligned or replaced. Secondly the interlock, this is on the hinge side of the window and can also be misaligned, and again it may be possible to give them a clean but in some cases it might be necessary to have them replaced.

The second most frequent cause of draughts is the window seals. These are prone to wear or damaged over time and allow air to escape through these gaps. Replacing these with high-quality weatherstripping can help prevent draughts. Another alternative is to replace the window with low-emissivity glass. this will help in regulating indoor temperatures and will lessen the possibility of draughts.

The last way to reduce the amount of draughts is to use a Draught-exclusion device. These are usually fabric tubes filled with a filler, which can be put on top of your window sill. They will help block out cold air and keep your home warm and cozy!

Your upvc windows can keep providing excellent insulation and security in your home by performing regular maintenance and repairs. It is crucial to keep in mind that all windows will eventually become worn out, and it may be cheaper to replace them instead of fixing them. If you have any problems with your window repairs made of upvc it is recommended to speak with a professional immediately.