• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC windows are a great choice for modern homes. They are easy to maintain, durable and long-lasting. As opposed to aluminium and timber they do not corrosion or rot.

It is essential to clean and oil UPVC windows and doors regularly. This will help avoid unnecessary repair costs as well as improve energy efficiency.

1. Broken Glass

The broken glass in your windows could cause severe damage to your home and may even be fatal. It is essential to take the time to ensure that you are doing everything you can to keep your windows in good condition.

Single-pane windows are relatively easy to replace, and they typically fit into frames that were previously in use very easily. If you have double-paned windows which are joined by internal beading, it is difficult to remove and replace the panes that were previously in use. In this instance it is essential to purchase plastic spacers in order to help the new pane fit into the window frame.

Wearing eye protection and thick gloves is essential when you are planning to remove the glass yourself. It is also an excellent idea to lay down a dropcloth before you begin working on the glass, so that any fragments of glass fall onto the fabric instead of landing on the floor where they could be trodden under and cause further damage.

Once the glass is removed from the window, it's best to seal the gap with packaging tape or duct tape to stop water and drafts from getting into the home until a professional comes out and fix the window. This also serves as an obstruction to prevent intruders from getting into your home. If the gap is particularly large, you might be interested in a security door that has an integrated window, as it will provide the best of both worlds.

2. Sagging

uPVC is a durable energy-efficient, cost-effective and economical alternative to timber sash window. As time passes, they may be affected by a variety of issues such as sliding. A window that is sagging can cause problems with light, draughts, and even security. It's crucial to act when you discover that your uPVC windows are falling down.

Repositioning the hinges could aid in fixing a window that is sagging. First, you'll need to unblock the windows to access the frame. You can then unscrew both the top and bottom hinges with a screwdriver and adjust them counter-clockwise or clockwise. After you've repositioned the hinges, shut your window and verify the an appropriate fit. If you are happy with the fit of the window, tighten the screws to hold them in the right position.

If you cannot reposition the hinges, you may have to replace the seal. Rubber seals can dry out and lose their elasticity with time, leading them to lose their tightness. If this happens, it's important to replace the seal as quickly as possible so that your uPVC windows are waterproof and secure from draughts.

uPVC handles may also become loose. This is often caused by screws that have loosened over time, but it could also be caused by the handle mechanism wearing out. It's relatively easy to fix a loose uPVC handle. First, you'll need close the window and perform a test fit. The joint at the corners of the sash must align with the joint on the casing. If it isn't then you can use the screwdriver to loosen up the handle. Then turn the mechanism into position.

3. Water Leaks

If you wake up to wet floors and damp walls each time it rains, it's crucial to take action. Windows that leak water do can not only cause degrading of the structure of your home but also undermine your efforts to control the temperature in your home. Most of the time, uPVC window leaks are caused by a lack or damage to the sealant.

This is a relatively easy fix that can be done by any DIY expert. Depending on the severity of the issue the caulking used previously may require removal before a fresh layer can be applied. It is essential to remember that when it is about uPVC window repairs, you should avoid the temptation to "over-caulk' as this will only make the area more difficult to clean and could decrease the efficiency of your energy usage.

Make sure that the drainage holes are free of debris in them and ensure that the sill pan is angled correctly to drain away from the window. In more extreme situations, you may have to replace the window.

Mold spots and rotten sills are another sign of water leakage. This fungus thrives in damp conditions and can quickly spread across the house.

It is also important to remember that if the leak originates from the glass in your double glazed windows, it is more likely to be a problem with the glass seal rather than the frame or sagging. This can be easily fixed by an upvc window repairs near me window specialist who will replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

Hinges may be to blame if your uPVC window is difficult to open or if it opens with an ease. Anyone who is a skilled DIYer can fix hinges in just a few minutes.

Like any mechanical component hinges are prone to wear out over time. It is an easy procedure, but it is easier when you have a person to help hold the frame in place.

It is also important to ensure that the uPVC hinges are being opened and closed in the correct direction. You can check this by looking for the arrow on each hinge. This indicates the direction in which the window should be opened.

The problem can be caused either by opening the window repair incorrectly or a faulty installation at the factory. Sending us a photo through our website can often solve the issue. We are always happy to offer assistance.

It is also essential to ensure that the hinges are lubricated on a regular basis. Applying an engineering lubricant that is light to the hinges is a good method of doing this. We suggest using an oil that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication can help the window to operate and close more smoothly. It can also stop corrosion and decrease the chance of sticking. It is recommended to do this at least once a year. WD40 and other solvent based lubricants are not recommended as they will damage parts of your uPVC window.

5. Draughts

Draughts in Upvc windows can be caused by a few various factors. The hinges, also because of wear and tear, may become displaced, which will cause an opening to appear where the sash meets the frame. This can be easily repaired by giving them good clean, but if they are beyond repair it could be necessary to have them realigned or replaced. The interlock may be misaligned. This is located on the hinge side and may need to be cleaned. In certain instances it might be necessary to replace these.

The seals may wear out or get damaged over time, allowing air escape. This can be avoided by replacing them with high-quality weatherstripping. Another alternative is to replace the upvc window with glass that is low-emissivity, which will help regulate indoor temperatures and will reduce the possibility of draughts.

Lastly, one of the most effective ways to reduce draughts is by using an draught excluder. These are usually fabric tubes that are filled with some sort of filler and can be put on the top of your windowsill. They can help block out cold air and keep your home warm and cosy!

Your upvc windows can keep providing excellent insulation and security in your home with regular maintenance and repairs. It is essential to remember that all windows will eventually get worn out and it could be more cost-effective to replace them instead of fixing them. If you encounter any issues with your Upvc window, it's best to consult a professional as soon as you can.