• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Locked Keys in Car? Here's How to Open Your Car Without Damage

Don't panic if your car has locked out of car help the keys in your car. You can try several techniques before calling a roadside assistance or locksmith service.

For instance, you could use a shoelace with the slip knot to tie up the post lock, or a coat hanger made of wire that you twist and then mold into hook. You can also make use of a door wedge or an inflatable wedge.

Pump Wedge

Contact a professional if are stuck in your car and DIY methods such as shoestrings, wedges or wire hooks don't work. A locksmith or a repo service provider may have lockout tools that can allow you to unlock your vehicle without causing any damage.

If they do, be sure you are using them correctly. Be aware of where to insert the wedge tool. Many people put the wedge tool in the top corner of a door, which is the most vulnerable. This is a mistake, as you may damage the wires and weather stripping inside the doors. Put the wedge where you can see the biggest gap and where the highest leverage is.

The Pump Wedge is an inflatable wedge made from durable vinyl that will not damage the surface. It is placed between the door of your vehicle and the door frame, and is then inflated to create a separation. This will allow you access to other tools, such as an opening tool for cars with a long reach rod. It also has a hook on one end, which you can shape to hold the latch within the door handle.

A less costly alternative is a pair of wooden door stops. They can be put on the rear of the door to open the space wide enough to accommodate a rod. You can also try the slim jim that is a thin metal strip that can be bent into a hook that can be used to latch on the lock and pull it up. This method requires practice however, as you should be cautious not to break the weather stripping of the door.

Another alternative is to use a shoelace but this only works with older cars without a push-button unlocking mechanism. You can tie a slip knot through the middle of the lace, and then move it up and down through the door's seam until you locate the latch. Then, you can move the lace until it hooks the lock, then tighten the slip knot and pull it upwards. This method is more difficult than other ones and could scratch paint or damage the door trim if you aren't careful.

Inflatable Wedge

If you have a wedge-shaped inflatable car door opener, you'll be able to quickly unlock your car without the need for prying or slim jim tools. These wedges for cars can be placed between the window and the frame of the vehicle and when inflated they create a space sufficient to accommodate tools with a long reach, such as a slim jim or a button grabber. This method is less dangerous than using a prying tool and is a viable option even if you don't have access to a screwdriver.

Another option to unlock a car without damaging its interior or exterior is to make use of a coat hanger made of wire that has been bent into a hook shape. This can be used to grab the lock button, and it could work better than a flat screwdriver as it is less likely to cause damage to the paint on your car. However, you must inspect all the doors to ensure there isn't another way to gain entry.

You could also try using a plastic bag that has been bent into a noose-like or v-shaped shape, but you'll have to be careful not to tear it as this could make your situation even more complicated. This trick can be especially effective if you are struggling to locate the button for locking. This method isn't as reliable as a wedge, or a coat hanger, but it could aid you in a pinch.

Stay calm and put safety first. There are several ways to solve this problem. If you read this article, you'll be prepared for any situation that could arise. You can unlock car services your vehicle by following our instructions. This will prevent any unnecessary damage and stress. If you can, bring your keys along when you leave your car.

Shoelace

It's one of those "oh crap!" moments that can ruin a day. It's a good idea to have a few things that you can use to open your car without breaking any windows. Certain of these items are readily available and will save you money on a locksmith or the time required to call roadside assistance.

A shoelace, or twine, can be a great tool for unlocking the car. It's simple to use and can be used on a variety of cars. This method only works on vehicles with post locks. These stack vertically on the window sill and are easily accessible from the outside the vehicle. Use a shoelace and the slip knot to complete the task. Then, wiggle the shoelace into the gap between windows and doors. Once the slip knot has been put in place, pull the two ends of the string up to tighten it.

This method is only applicable on older models with a locked that is hooked. A screwdriver, if available, can help open the door in a slightly more aggressive manner. You can also use a rod that you can pull from a nearby item, such as a doorframe, or an object of wood to attach to the window frame. This will allow space for a rod to push the locking button.

While the methods mentioned above are safe for the majority of drivers, it is best to get help whenever possible. This will prevent any additional damage to the vehicle, and will also decrease the likelihood of an accident caused by the stress of the situation. If you don't have a cell phone or are unable to reach a helpline, it is important to notify trusted family members and acquaintances know where the vehicle is. Additionally, a spare set of keys can be stored in an easily accessible location in the vehicle so that you can access them when required.

Wire Hanger

There is no doubt that locking your keys in your car could be a stressful situation. The trick is to remain calm and think about all your options logically. You will avoid making the situation more difficult if you don't get caught up in panic.

You can also use a modified wire hanger to access your car. You'll need to uncoil the coat hanger until it has a straight slant and a hook, which you can use to move the lock rod within your door. When you have reached the lock rod, you should be able pull it up to open the door.

Another option to consider is using a rod, or even the metal of the body of your vehicle. You should make sure that you don't harm the vehicle during this process. It is recommended to avoid disassembling the car opening. It is also important to be as patient as you can since this method is likely to be more effective for older vehicles than it does on the latest models, but it can still be utilized when you own a car with a distinctive outer door handle design.

You can make use of a shoestring and a slip knot to accomplish the same thing. This can also be done on a post lock, but it will be slightly more difficult to maneuver since you'll be relying on the tension from the string to grasp the lock. The best way to do this is by threading the shoestring through a small hole that you can create in the weatherstripping on your vehicle's door. After the shoestring has passed through the weatherstripping, you are able to pull the string tight to form a tight loop that snaps around the lock. If you're lucky, the lock will be at the right spot.