• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

How to Programming a Subaru Key Fob at Home

Based on how recent your Subaru is, you may require the key fob programmed by a dealer or an automotive locksmith. This is typically done through the connection of a programming machine to the computer in the vehicle.

To program your Subaru, start by unlocking the driver's door using the door button control, and then close it. You will hear the chime sound and see the dome lights blink in the instrument panel.

Step 1: Locate the Transmitter Circuit Board

There are a variety of ways to program your key fob. First, you must determine the type of key fob that you have. You can do this by studying the shape of your key fob or by listening to the car's sound.

Once you have the information you require, you can begin the process of programming your key fob from home. You'll need a flathead and a metal key to complete this. You can open the key fob by twisting it. Push the key's metal part into the case, and then release the battery by pushing the tabs that hold it in place. Replace the battery with a new one and put the key fob case back together.

Step 2 Step 2: Unscrew your Key Fob Case

Change the battery is a good idea, as it can bring back key fobs that aren't working no longer. However, there are some situations where the buttons on the key fob may be damaged. If you see that the metal contacts of the button are loose try soldering them back in their place in order to get them back to function again.

Before you start the process, ensure your car's doors are shut and that your ignition is turned off. Close the driver's side door and then press your door button 10 times in rapid succession. Then, you should hear the instrument panel chime, and your dome light will flash. This indicates that you're prepared to move forward.

Step 3. Insert the fob of your key into the ignition

There are many websites online that can give you the steps to program a replacement or new Subaru key fob at home, but they are not precise. Reprogramming an electronic lock is best done by an expert auto dealer in Fort Bliss or a locksmith.

Sit in the driver's seat of your subaru replacement key cost with the engine off and all doors shut. Use the door button to unlock all of the doors. Open and close the driver's door twice more. Then, insert and remove the key from the ignition switch (don't turn it) 10 times within 40 seconds. The system will chirp when the settings are altered.

Step 4 Step 4: Switch on the ignition

It is important to know that this method of programming a key fob only works if you already have a working key. If not then a dealer or auto locksmith will be required to program a brand new key for your subaru car keys in Fort Bliss.

After the key is programmed, it should be able to start your vehicle within about five minutes. Begin by closing all doors and turning off the engine. Then, sit in your driver's chair and unlock all doors with the door button control. Place the key in the ignition and turn it back to the first position. The electrical systems will be activated however the engine will remain in neutral. Repeat this process 10 times.

Step 5: Unlock the driver's Door

Subaru offers a variety of high-end vehicles with key fobs that lock and unlock doors, turn on the engine, and even defrost windows. These devices may stop working.

To resolve the issue to fix it, you must contact a locksmith or a dealer. This will fix the problem and ensure that your car is safe.

It is necessary to first open and close the door on the driver's side. Place the key in the ignition and then turn it back to position 1. Then, you can turn it back to the off position. Do this as fast as you can 10 times. After the tenth repetition, you will hear a chime.

Step 6 Step 6: Press the Lock/Unlock buttons on the driver's Door

If you need to replace the battery in the subaru key cutting key fob, the procedure is simple. Open the exterior fob case. Then make use of an flathead screwdriver, to pry open the internal case and then remove the battery.

After taking out the old battery, replace it with the new one and close the case. Relax in the driver's seat and then unlock all doors by using the door-button control. Finally, place the ignition key and turn it to ensure that the electrical systems are on, but the engine is off. Repeat this 10 times until you hear a chime on the instrument panel. This will put the system into programming mode.

Step 7 Step 7: Press the Lock/Unlock button on the Passenger's Door

For some owners, the annoyance chirp heard when locking and unlocking a subaru key (historydb.date) fob from outside the vehicle can become distracting. In some instances you can deactivate the chirp by opening and shutting all doors while double-clicking lock button on the key fob.

Switch the ignition off and shut all doors as well as the lid for the fuel-filler. For 10 seconds, press and hold the lock button on the key fob. The instrument panel emits a chime after this is accomplished. The chirp indicates that the lid of the fuel-filler door are locked. The setting can be changed to make the lids and doors lock automatically without pressing the request switch.

Step 8: Enter your 8-digit Transmitter Number

Keep the first 8 digits of the code in your head. Then, get into your driver's seat, close all doors and turn the key to the first position (towards on). After ten turns, your instrument panel should chime once.

Next, open the key fob case and look for the circuit board that controls the transmitter. The circuit board should have one or two numbers with 8 digits. Note the first number sequence, and follow the steps in this guide to register the code on the system of your vehicle. This procedure may require a visit to the dealer for older models.