• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

How to Properly Start a Wood Burning Stove

Wood stoves can be an ideal way to save energy and also heat a room. However, they require some level of maintenance.

Many modern wood stoves meet EPA emissions guidelines. Look for an EPA sticker on the underside or next to the grate to make sure your stove won't produce many harmful pollutants.

How to Start a Wood Fire

The scent and sound of a fire made from wood can be a welcome addition to any house. But it's important to learn how to properly create a fire on your stove wood burning. Improper techniques can result in the fire not to burn well, and may produce creosote or smoke. The tips below can help you create an efficient fire that can heat your home quickly and effectively.

Before you begin a fire, check the condition of your coals and logs. If they're too damp, they will smother the flame and stop it from burning efficiently. You may also want to open the flue to let any ash out that has been deposited into the stove.

Start by placing several small newspaper pieces that are dry and clean into your stove. This will help ignite the sparks. After the tinder and kindling have started to ignite, you can add a layer of larger kindling pieces on the top. This should be done with the crosshatch pattern to ensure that there is air between each piece.

If you own a portable wood fireplace stove that has an automatic control for combustion that will automatically deliver an air stream controlled to the flame as it heats. This will enable the fire to burn at a steady rate without having to open the stove's doors to maintain it.

It's important to avoid using too much tinder, since this could result in an unburned fire that burns at an excessive rate and doesn't utilize the fuel as efficiently as possible. Once you've got a good bed in your stove of tinder, kindling and embers, start the main flame by laying down two large base logs on the grate. Then, you can lay small logs perpendicular to these and on top of the base logs. This "top-down" method of building a fireplace will result in an effective and long-lasting fire that doesn't engulf larger base logs.

Close the damper after your fire has been established, and keep it shut. The fire can be smothered by opening the damper before it has fully established. It can also decrease the efficiency of the fire.

Adding Wood

Stoves can be used to efficiently heat your home and help you save money. They can be used on their own or in conjunction with central heating or a furnace system to provide the additional heat required in large houses or houses with a lot of rooms. Many of the new stoves that are clean-burning employ a superior combustion process that differentiates the burning of volatile compounds from combustible gasses and tar by providing air in two different stages. The first stage is for the vaporization and the second step is to provide pre-heated fresh air. This improves combustion and decreases the odors.

The amount of heat you can get from your stove is contingent on the kind of wood used as well as the amount of moisture in it as well as the size of the logs. To let the wood dry, logs must be stored in a well ventilated location for a few months before burning. If the logs are soaked with too much moisture, they will create steam, which is basically wasted energy.

It is best to add wood to the pile at intervals and not all at once. The addition of too much wood at once can cause the temperature to rise in the firebox, creating an air vortex that draws smoke and volatile compounds that have not been burned back into flames. This could decrease the efficiency of your stove.

Avoid using other combustibles inside your stove such as paper or cardboard because they are not wood. They have different physical properties and can't be burned without creating dangerously high temperatures. Also, you should not use compressed combustibles like wood briquettes, as they have a distinct physical and chemical composition from real firewood and aren't approved for burning in wood burning stoves.

It is important to have a professional install and test your wood stove. A certified WETT technician will test the installation to ensure proper operation and safety, as well as ensure that your chimney is operating correctly. These professionals can also offer maintenance services to keep your chimney and stove in tip-top shape. They can check for leaks in the areas accessible to your chimney and fix any problems they find. They will also ensure that all house occupants know and follow the evacuation procedures for fire in case of an emergency.

Adjusting the Damper

A damper regulates the amount of heat that is lost through the chimney when you aren't using your stove. It can also be used to control the flame. If the flue is opened but the damper is not closed enough, the fire won't be able to burn properly and will release smoke into your living area. To get the most effective fire using your damper adjusted properly you have to experiment with different settings and observe how each one affects the flames.

You want to keep your damper open to allow air to flow into and out of the flue when a flame is burning. This will let the fire start and stay lit for several hours. The proper opening will stop the fire from becoming depleted of air and stop it from blowing smoke.

To properly adjust your damper first, make sure that the fireplace has been preheated and the wood stove is hot. This will ensure that the chimney stays warm and has a good draft. Once these are done the damper for wood stoves can be adjusted.

After the fire has smolder slightly, you need to shut the damper down to about three-quarters of its full position. This will prevent the warm air in the room from venting up the chimney while still allowing smoke to escape from the wood stove.

This is the best way to keep your fire burning and keep it from getting too hot. The draft could be stopped if you shut the damper too far, but a cold wind could enter your home when the damper is not closed.

Placing your hand on the top wood burning stoves of the flue pipe will inform you how much the damper has opened. If you feel a breeze pushing against your palm the damper is probably in the open position.

The damper's setting can vary slightly from one stove to the next and even between different types of wood. The process of experimenting with the various settings will give you an idea of what to look for, but you may need to tweak until you get the ideal setting for your stove.

Clean Up

It is essential to clean your stove and flue after a fire. This can reduce the chance of an explosion in the chimney which is the most common cause of fires caused by wood stoves. Creosote is a sticky substance that accumulates on the stovepipe's interior and can be very dangerous. It is caused by moisture and unburned wood burning stove for a shed particles that are unable to escape from the fire. It can also be caused by improperly lit fires.

A regular cleaning schedule can help keep the buildup of creosote at bay. This can be done by sweeping your chimney once a year. It is recommended that you have your stove and fireplace professionally inspected and cleaned at least once per year.

It is also an excellent idea to clean out the Ash tray and grate frequently. It is best to burn only seasoned wood because it produces less creosote. It is also a good idea to avoid burning cardboard, paper, plastic and other trash items. These items could release dangerous chemicals into the flue and air, which can be released into your home.

It is also necessary to clean the glass of the wood burning stove on a regular basis. A lot of Contemporary Modern Wood Burning Stove wood stoves have self-cleaning glass, meaning that they do not require much scrubbing. You can use stove glass cleaners on the glass if you aren't capable of getting the glass as clean as you'd like on your wood stove.

Some other helpful suggestions for maintaining your wood stove are to turn the vent off when you are not using it and cracking a window or door to increase the flow of air. This will help keep the fire burning hotter and more efficiently since it won't have to exert as much effort to circulate the air. It is also a good idea to not stack logs or place them in the fire for prolonged periods of time as this can lead to splitting and warping. It is best to avoid using combustible compressed wood in your wood stove as the paraffin that is contained in the indoor wood burner stove can melt and then flow into the flue and cause damage.