• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

UPVC Replacement Door Handles

The handles on your doors wear out with time and require to be replaced. When doing this it is essential that the new handles are in line with the critical dimensions of the previous handle.

The three measurements to check are the top screw's location the lever and key hole dimensions. Use the size guide to help you.

Inline Lever/Lever

A lever handle for double glazed window is a modern door handle designed to work with new or replacement doors. This kind of door handle is available in a wide range of styles and finishes. A number of manufacturers offer this handle including Avocet, ERA, Fullex, Hoppe, Mila, Millenco & Yale.

Fab and Fix Windsor Inline Sprung Lever Door Handle

The uPVC/Composite handles are made of tough materials and are ideal for multi-point lock doors that require a robust design. The handles are inline and operate off the same spindle and screw fixings so they can be easily fitted to new or existing uPVC/Composite doors.

The handle can be placed and angled to suit the needs of all users. The handle has been endurance tested to 200,000 cycles. This allows for the assurance of the quality of the finish and performance of the handle over time. The lever that springs is adjustable to accommodate a wide range of locks. This is particularly useful for doors with narrower frames, where the cylinder is located further back. A shorter lever is an ideal choice for doors where the latch can be operated by a thumb turn inside.

Lever Pad

A Lever Pad upvc door handle for double glazed window operates differently than lever handles found on most doors. These handles can operate from a single spindle (inline) or independently from each side using two inline or offset spindles (pad). They are commonly employed on UPVC doors with double glazing window handles glazing. They are available in a variety of finishes & variations.

The handles have been tested to a minimum of 200 000 cycles and are available in a variety of finishes, including White Silver, Chrome, & Gold. The finish is BS EN 1670 Grade 5 and resistant to corrosion. This provides the handle with an outstanding performance and durability for its intended use.

All of the UPVC handle lever pad styles are supplied with a spindle and screws, allowing them to be installed on any new or existing uPVC door. The 211mm backplate fixation centres allow for a wider handle, which is usually a benefit when replacing an old or damaged multi-point door lock mechanism. The handle levers are spring-loaded, which solves the issue of handles that slide out of the horizontal position when not in use.

It is crucial to match the PZ dimensions for both the multipoint lock as well as the uPVC doors when choosing the replacement UPVC spindle and handle. This measurement is also called 'handle centre' or cylinder centres'. It is important to match the right handles.

When you have the right PZ size you will then be required to make sure that the handle lever pads and push pads are in a suitable shape to fit the American with Disabilities Act (ADA) approved handles you require for your doors. These are usually square or round with an internal lever, and an external push pad.

The majority of UPVC Lever Pads that we sell are spring-loaded. This means they will return to a horizontal position after not in use instead of hanging, and possibly being stuck in the frame. This prevents draughts from entering the property. The majority of UPVC lever pad handles come in both left and right handed versions that allow them to be installed on either side of doors.

Euro Cylinder

Cylinder locks can be found on uPVC and other types of doors. They operate by using a key to unlock a cylinder that will reveal pins that can be aligned to those inside the lock body, permitting them to turn a revolving cam, thus opening the door. Euro cylinders can be fitted with up to six pins. Doors that are internal and external require different levels of security.

Choosing the right cylinder is vitally important; this is contingent on how your door and handle are utilized. For example, external doors require a higher security cylinder, while doors inside can be secured using an ordinary cylinder. Some cylinders have extra features that increase security, like anti-drill or anti bump properties.

To make sure that the Euro Lock handles cylinder is the correct size for your door, it should be measured accurately. The cylinder should be measured from the hole for fixing screws in the middle to the other end of the cylinder, including the thumb turn if you have one. If you are unable to measure with the lock in position, you can take it out of it. It is essential to ensure that there is no cylindrical lock that extends beyond the handle or escutcheon. This can make it vulnerable to lock snapping attacks.

The design of most newer cylinders comes with anti-drilling as well as bump resistance features. These features are designed to minimize the risk of attack by forcing the cylinder to rotate in an opposite direction. This will help to prevent attacks and protect your doors.

There are also cylinders that have been designed to withstand snapping. This is a common attack on cylinders. A specially designed tool is used to break the break line of the lock, and then the front of the cylinder is snapped off. This is a much faster and simpler method to gain access than through a multipoint window locking handles system. It also leaves no evidence of the break-in which can delay insurance claims.

Spring Cassette

The spring cassette is located inside the base of your door handle's backplate, providing a spring solution and returning the multipoint lock handles back to their rest position after using. There was a time when handles did not have a spring integrated into them and without this they are more likely to slide or 'drop' once the locking mechanism has been disengaged. This simple part is the most effective way to fix this problem. It also stops your door from becoming stuck in either the closed or open position since they aren't easy to close manually.

These spring cassettes have been specifically designed for use with multipoint locks that are sprung They will not work with unsprung multipoint handles and you must have a bespoke hole cut into your backplate to allow these to fit (please see image for technical diagram). They are a replacement for existing broken or missing cassettes within the backplates of door handles of many kinds of uPVC doors. They are sold as one unit. They come with a square cut out that accommodates an 8mm shaft.

These spring cassettes are a great value solution to the issue of door handles that have become sagging. They are simple to put in and will prolong the life span of your uPVC doors. For more information about our range of uPVC spares and accessories you can get in touch with our team. We are always ready to provide expert advice and to assist you.