• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Sash Lock Door Handles

If you want to enhance the security of your home without sacrificing aesthetics choose sash lock door handles. They can be used with a mortice lock or sash lock, and can also be combined with the nigh latch to offer extra locking for internal door.

The handles consist of a lever/handle mounted on a backplate and are generally used with a three or five lever mortice lock. They can also be combined with tubular latches.

Lever Lock Handles

There are many types of lever handles that will fit any style. The rustic lever locks are very popular in both farmhouse and modern homes. Classic lever handles are round or spherical and are simple to grasp. They are simple, affordable and fit in with any type of home design. For a stylish style, choose polished chrome or a satin nickel handle. These finishes are easy to clean and durable. Antique bronze and polished brass are also options. Many handles have a decorative design, like small amber worm eyes, or long-horned crystals. Some have the shape of a pin or star that is molded into the base of the lever.

To replace the lever lock door handles, you need to have the correct screwdriver, or tool to disassemble the handles. You might require an awl, or a nail based on the design and model. Some lever handles feature tiny holes or a notch at the base of the handle that can be used to pull them open.

Once you have the right tool Follow the manufacturer's directions to remove your existing handles. Check the spindle of your new lever. Existing doors might have been morticed for locks and latches in the past, which require a specific spindle. Most lever handle manufacturers have an established door handle spindle size.

If you are looking to replace a sash-lock door handle, remove the handle that was previously used and disconnect the tubular latch bolt from the strike plate that is on the door frame. The latch bolt has to be put through a hole in the frame of the door and connected to the strike plate.

When installing a new lever door handle, it is crucial to remember that all ADA (Americans with Disabilities Act) compatible handles are designed to be operated by hand and do not require the user to tightly grip or turn their wrists. In order to meet ADA standards for compliance, the lever door handle can't be operated with fingers and thumbs or the entire hand.

Sash Lock Handles

The primary function of door handles with sash locks is to pull the sashes that are moving together in a tight seal. This helps to keep the temperature inside the house and also prevents drafts. These locks are great for doors that do not require for a keyed lock system.

Mortice sashlocks are sash locks that combine the latch and deadbolt into one case. They are fitted into the door's materials. They are used in conjunction with door handles, and there are many different options available to suit your home.

Lever lock handle operates with a lever on the backplate, which is cut off below, which allows a key to be inserted to operate the mortice double glazed sash windows for listed buildings lock. This lock is usually used on doors that do not lock, like those found in dining and living rooms. However it is also possible to use with a tubular lock to provide a more secure door.

These are designed to hold the sash window restoration in place at various points, and feature a hook that fits inside the keeper. They come in various styles and designs to fit into various types of windows like sliding or hinged casement windows. Some are made from cast aluminium, whereas others are made are made from brass or even iron wrought. They're available in a range of finishes that match other elements of your door furniture for instance, escutcheons that protect the keyhole.

The 3 lever sash locks are suitable for internal doors. They don't provide the security required by insurance companies. They also have a lower resistance to forced entry, which makes them more vulnerable than their certified 5 lever counterparts.

A door sash with five levers is the best option for doors that are external. It provides higher levels of resistance to forced entry, and is harder to pick or bypass. The locks are a revolutionary design that has been tested and certified to meet the strict building regulations for fire, disability and security.

To replace a sash-lock handle, remove the old fastener from both ends by taking out the screws. Make sure you have a screwdriver in your possession and carefully separate the pieces so that you don't damage them. Use a pencil to mark the location of the screw holes to ensure that you place the new fastener correctly when it comes time to install. Clear away any dust or flickers of paint and then screw the new fastener into place. Test the handle to make sure it functions properly and creates an airtight seal.

Tubular Latch Handles

The tubular latch is a latch mechanism which is positioned inside a door and is operated by turning your handle. It is designed to shut the door however, it doesn't lock the door as a mortice lock would. They are most commonly used on internal doors, where locking is not required. They can be equipped with lever or knob handles.

Tubular latches are available in different sizes. They range from the cheapest to top-of-the-line architectural quality. The size of the door depends on its use and whether it has an lock. For example the bathroom door might require the ability to turn a thumbturn and release in case of emergency, so you'll require a lockable latch.

The backset of your door will influence the latch you choose. This is the distance between the edge of your door and the center of the hole that is used for the door handle knob or rose, and you must choose a latch with a matching backset measurement. This will ensure that your door handle or knobs can operate the latch without a hitch.

If you're installing a spring or unsprung lever or door knob, it is crucial to choose a sturdy tubular latch that has an oversized sprung follower and tongue. This will provide an effortless action for the latch, and stop it from becoming sluggish and inactive after regular use.

The next step is to install the latch on the door. First, make sure the latch is in line with the top of the door frame or casing by measuring and marking the location of the latch plate then drilling holes for it. Utilizing a countersink drill bit will help to create the correct recess for it to fit comfortably into.

Once the latch is installed, you can screw it onto the door. It is important to check that it's functioning correctly prior to fitting the door handles and installing the locks, so make sure to test it by closing and opening the door repeatedly. If it's not functioning properly Try lubricating the door using WD40. Then re-try it. If you are still experiencing problems then it might be necessary to talk to an expert installer or locksmith.

Keyhole Handles

Keyhole handles are fitted with a tubular latch that is installed in the door to open and close it. When pushed down, the handle engages the latch, and pulling it up releases it allowing the door to open. The handles are typically used for doors that are inside like those in dining rooms and living rooms. However they can also be affixed to front door if paired with the nightlatch.

Door knobs are contemporary handles that include a sprung lever/handle with a square or round fixing stem and a thumb-turn or escutcheon. They come in a wide variety of styles and finishes to suit different doors around the home. They can be used in conjunction with Euro cylinder locks or multipoint locking systems to provide extra security to your door. This is accomplished by locking the door at various points along the length of the door. Compatible door handles must be fitted with the proper dimensions for the center of the lock to fit the barrel.

Keyhole escutcheons serve as an escutcheon that covers the door's keyhole that hides it from view and provide an elegant finish to the handle. They come in both a pop on or screw on style and are available in a variety of finishes to match the door handle. Alternatively, a recessed escutcheon can be fitted to the edge of the door to conceal the keyhole and create an updated look.

Some handles are compatible with Euro-cylinder locks. These handles are suitable to secure uPVC door and require compatible handles with the Euro cylinder hole and screw holes in the backplate. These handles also require an Euro Cylinder escutcheon, or a standard escutcheon, based on the application.

Whether you choose a mortice lock or a sash window locks lock, or a tubular latch for your door, you need to know the distinct features of each and the requirements they must meet for compatibility with the other components of your uPVC door system. You'll have to take into consideration the door thickness, door hinges and frame reinforcements as well as the door handle backplate size, lock centre dimensions and the screw centres for the cylinder.